Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.1.1. Mechanical part of engines
2.1.1.1. Cover of a head of the block of cylinders
2.1.1.2. Head of the block of cylinders
2.1.1.3. Laying of a head of the block of cylinders
2.1.1.4. Block of cylinders
2.1.1.5. Cranked shaft and radical bearing
2.1.1.6. Balancing block
2.1.1.7. Principle of operation of the balancing block
2.1.1.8. Damper of krutilny fluctuations of a cranked shaft
2.1.1.9. Forward cover of the engine
2.1.1.10. Piston
2.1.1.11. Piston rings and piston finger
2.1.1.12. Rod and shatunny bearing
2.1.1.13. The Klapanny mechanism – general information
2.1.1.14. Camshaft
2.1.1.15. Camshaft asterisk
2.1.1.16. Asterisk of a cranked shaft
2.1.1.17. Chain of a drive of the mechanism of a gazoraspredeleniye
2.1.1.18. Natyazhitel of a chain of a drive of the mechanism of a gazoraspredeleniye
2.1.1.19. The valve, a klapanny spring, the maslootrazhatelny cap, the directing plug of the valve
2.1.1.20. Valve pusher
2.1.2. Mechanism of change of phases of a gazoraspredeleniye
2.1.3. Greasing system
2.1.4. Cooling system
2.1.5. Fuel system
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
2.1.7. Electric equipment of engines
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 

2-1-1-1-kryshka-golovki-bloka-cilindrov.html

2.1.1.1. Cover of a head of the block of cylinders
Fig. 2.3. Cover of a head of the block of cylinders: 1–sensor of provision of a cam-shaft (CMP); 2–fixing opening of the oil managing director of the valve (OCV) (L3 engine); 3–cover of a maslonalivny mouth

The cover of a head of the block of cylinders is made of an aluminum alloy thanks to what has small weight and possesses high sound-proof characteristics. On a cover there is an inflow for installation of the sensor of provision of a cam-shaft which is located in its back part. In a cover of a head of the block of cylinders of L3 engines there is an opening for installation of the oil managing director of the valve (OCV) (fig. 2.3).
«previous page
2.1.1. Mechanical part of engines		 following page»
2.1.1.2. Head of the block of cylinders