Mazda 6 since 2002
1. Operation and car maintenance
1.1. Car description
1.2. System of passive safety
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.2. Engine overheat
1.4.3. Car evacuation
1.4.4. General information and security measures at control survey and car maintenance
1.4.4.1. Check of level of engine oil
1.4.4.2. Check of level of cooling liquid
1.4.4.3. Check of level of working liquid in a tank of the steering hydraulic booster
1.4.4.4. Check of level of working liquid of automatic transmission
1.4.4.5. Check of level of working liquid of automatic transmission on the 4WD olnoprivodny cars
1.4.4.6. Check of level of liquid of washers of glasses and headlights
1.4.4.7. Greasing of knots of a friction on a car body
1.4.4.8. Replacement of a filtering element of the filter of an air purifier
1.4.4.9. Replacement of brushes of a cleaner of a windscreen
1.4.4.10. Service of the storage battery
1.4.4.11. Check of level of electrolit
1.4.4.12. Charge of the storage battery
1.4.4.13. Check of pressure of air in tires
1.4.4.14. Periodic shift of wheels
1.4.5. Lamps of devices of lighting and light alarm system
1.4.6. Care of a body and car salon
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 






1-4-4-2-proverka-urovnya-okhlazhdayushhejj-zhidkosti.html

1.4.4.2. Check of level of cooling liquid

Check temperature of the beginning of freezing of cooling liquid in system of cooling of the engine at least once a year – before the beginning of a winter season, and also before a trip to places where the temperature of air can be negative.
Check a condition and tightness of all connections of hoses of system of cooling of the engine and a heater. Replace all deformed or damaged hoses.

Fig. 1.180. Check of level of cooling liquid


On the cold engine level of cooling liquid should correspond to the basis of a jellied mouth of a radiator and be between top («FULL») and bottom («LOW») labels on a wall of a broad tank (fig. 1.180).
If level of cooling liquid fell to the bottom label («LOW»), add cooling liquid in a broad tank and finish its level to the top label («FULL»). To prevent freezing of cooling liquid and to provide anticorrosive protection of the engine, use for долива only cooling liquid of the recommended brand and demanded concentration.

NOTE
If on a cover of a radiator or a broad tank or about them there is «FL22» marking, it is necessary to add only cooling liquid of the FL22 brand.

«previous page
1.4.4.1. Check of level of engine oil
following page»
1.4.4.3. Check of level of working liquid in a tank of the steering hydraulic booster