Mazda 6 since 2002
1. Operation and car maintenance
1.1. Car description
1.2. System of passive safety
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.2. Engine overheat
1.4.3. Car evacuation
1.4.4. General information and security measures at control survey and car maintenance
1.4.4.1. Check of level of engine oil
1.4.4.2. Check of level of cooling liquid
1.4.4.3. Check of level of working liquid in a tank of the steering hydraulic booster
1.4.4.4. Check of level of working liquid of automatic transmission
1.4.4.5. Check of level of working liquid of automatic transmission on the 4WD olnoprivodny cars
1.4.4.6. Check of level of liquid of washers of glasses and headlights
1.4.4.7. Greasing of knots of a friction on a car body
1.4.4.8. Replacement of a filtering element of the filter of an air purifier
1.4.4.9. Replacement of brushes of a cleaner of a windscreen
1.4.4.10. Service of the storage battery
1.4.4.11. Check of level of electrolit
1.4.4.12. Charge of the storage battery
1.4.4.13. Check of pressure of air in tires
1.4.4.14. Periodic shift of wheels
1.4.5. Lamps of devices of lighting and light alarm system
1.4.6. Care of a body and car salon
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 






1-4-4-1-proverka-urovnya-motornogo-masla.html

1.4.4.1. Check of level of engine oil

1. Be convinced that the car costs on an equal horizontal platform.
2. Warm up the engine to normal working temperature.
3. Muffle the engine and wait for not less than 5 mines in order that oil flew down in the pallet.

Fig. 1.179. Masloizmeritelny щуп petrol engine


4. Take out control oil щуп, wipe it dry and again insert щуп against the stop (fig. 1.179).
5. Once again take out oil щуп and check oil level on щупу. Normal level of oil in the engine corresponds to a range between labels of the maximum and minimum level. If level of oil is about the bottom label of a minimum level or fell below it, it is necessary to add oil and to finish its level to a label of a maximum level.
6. Before inserting oil щуп into the engine, check, that the sealing ring on щупе was on the place.
Change of level of oil between labels on oil щупе corresponds доливу or to an expense of the following volume of oil.

«previous page
1.4.4. General information and security measures at control survey and car maintenance
following page»
1.4.4.2. Check of level of cooling liquid