|
2-2-10-6-ustanovka-perednejj-kryshki-dvigatelya.html
2.2.10.6. Installation of a forward cover of the enginePut kremniyevoorganichesky hermetic on a forward cover of the engine, in the places shown in drawing 2.108.
|
|
Fig. 2.108. Places of drawing of hermetic on a forward cover of the engine
|
|
NOTE
Establish a cover through 10 mines after hermetic drawing. For L3 model engines hermetic drawing in area C is not required (see fig. 2.108).
|
Thickness of put hermetic: 2,0–3,0 mm for area A, 1,5–2,5 mm – for area B.
|
|
Fig. 2.109. Order of a tightening of bolts of fastening of a cover of a head of the block of cylinders
|
Establish bolts of fastening of a cover of a head of the block of cylinders in an order specified in drawing 2.109.
|