Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.2.1. Engines of the L8 and LF models
2.2.2. Verification of the contents WITH / SN in the fulfilled gases
2.2.3. Compression measurement in engine cylinders
2.2.4. Check of a belt of a drive of auxiliary units
2.2.5. General information and safety measures at removal of the power unit
2.2.6. Hermetic removal
2.2.7. Removal and installation of the power unit
2.2.8. Check of the executive mechanism of change of phases of a gazoraspredeleniye (L3)
2.2.9. Removal and installation of the executive mechanism of change of phases of a gazoraspredeleniye (L3)
2.2.10. Chain of a drive of the mechanism of a gazoraspredeleniye
2.2.11. Removal and installation of the operating oil valve (OCV) (L3)
2.2.12. Check of the operating oil valve (OCV) (L3)
2.2.13. Check of operation of the zolotnikovy valve (OCV) (L3)
2.2.14. The general repair operations on the power unit
2.2.15. Check of a head of the block of cylinders
2.2.16. Assembly of the block of cylinders (beginning)
2.2.17. Assembly of the block of cylinders (termination)
2.2.18. Assembly of a head of the block of cylinders
2.2.19. Assembly of a drive of the mechanism of a gazoraspredeleniye
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







2-2-11-snyatie-i-ustanovka-upravlyayushhego-maslyanogo-klapana-ocv-l3.html

2.2.11. Removal and installation of the operating oil valve (OCV) (L3)

Disconnect a negative wire of the storage battery.
Remove an opening plate under a stopper.
Remove a high-voltage wire.
Disconnect the socket of the operating oil valve (OCV).
Measure resistance between A and B conclusions an ohmmeter.
Remove a ventilation hose.
Uncover heads of the block of cylinders.

Fig. 2.102. Komponeta of the power unit, chains of a drive of the mechanism of a gazoraspredeleniye dismantled at removal: 1–cover of a head of the block of cylinders; 2–fixing bolt of a pulley of a cranked shaft; 3–pulley of a cranked shaft; 4–a pulley of the pump of cooling liquid; 5–tension pulley of a belt of a drive; 6–rubber support of the engine No. 3 and arm of fastening of the engine No. 3; 7–forward cover of the engine; 8–forward epiploon; 9–natyazhitel of a chain; 10-lever of a natyazhitel; 11-directing to a chain; 12-chain of a drive of the mechanism of a gazoraspredeleniye; 13-consolidation; 14-natyazhitel of a chain of the oil pump; 15-directing to a chain of the oil pump; 16-asterisk of the oil pump; 17-chain of the oil pump; 18-camshaft asterisk


Remove the operating oil valve (OCV) (fig. 2.102).

Fig. 2.116. Removal of the operating oil valve (OCV): 1–the operating oil valve (OCV)


Establish as it should be, the return to removal.

«previous page
2.2.10.10. Installation of a cover of a head of the block of cylinders
following page»
2.2.12. Check of the operating oil valve (OCV) (L3)