Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.1.1. A car design with a body "sedan"
8.1.2. A car design with a body "hatch-back"
8.1.3. Body framework
8.1.4. Hinged and decorative components of a body
8.1.5. Doors
8.1.6. Window regulators
8.1.7. Dismantling and trunk lid assembly
8.1.8. Removal and installation of a front bumper
8.1.9. Dismantling and assembly of a front bumper
8.1.10. Removal and installation of a rear bumper
8.1.11. Removal and installation of a back slip
8.1.12. Removal and installation of a back spoiler
8.1.13. External rear-view mirrors
8.1.14. Removal and installation of an external mirror with the electric drive
8.1.15. Dismantling and assembly of an external mirror with the electric drive
8.1.16. Heater of back glass
8.1.17. The hatch on a roof
8.1.18. Seat belts
8.1.18.1. Removal and installation of a forward seat belt
8.1.18.2. Removal and installation of a back lateral seat belt
8.1.18.3. Removal and installation of a back central seat belt
8.1.18.4. Removal and installation of a forward buckle
8.1.18.5. Removal and installation of a back buckle
8.1.18.6. Seat belt check
8.1.19. Seats
8.2. Conditioner and heater
 






8-1-18-6-proverka-remnya-bezopasnosti.html

8.1.18.6. Seat belt check

Belt.
Be convinced of that the seat belt is established correctly.

Fig. 8.69. Seat belt check


Check a seat belt on existence of damages and deformation of metal elements (fig. 8.69).
If there are damages, replace a belt.
Natyazhitel.
Be convinced of that the belt is smoothly extended and taken up.
If it not so, replace a seat belt.
Be convinced of that the natyazhitel of a seat belt works at a fast pulling of a belt.
If it not so, replace a seat belt.
Remove a natyazhitel of a seat belt.

Fig. 8.70. Check of a natyazhitel of a seat belt


Make sure that the seat belt is not blocked at an inclination of a natyazhitel of a belt to 15 ° from a starting position and blocked, when the natyazhitel bends on 40 ° and more (fig. 8.70).
If it not so, replace a seat belt.
Take out a belt completely for change of a mode of blocking with ELR on ALR.
Be convinced of that the natyazhitel of a seat belt publishes a clicking sound at slow taking-up of a belt.
If the sound is not audible, the mode of blocking did not change.
If at repeated taking-up of click is not present, replace a belt.
Be convinced of that the belt is blocked at a pulling.
If it not so, replace a seat belt.
Be convinced of that the mode of blocking changes on ELR when the belt is completely winded.
Otherwise, replace a seat belt.
Limiter of loading of a natyazhitel.

ATTENTION
At operation of the limiter of loading the belt and the top fastening strongly rub the friend about the friend, leaving wear tracks.
The worn-out belt cannot carry out function of protection of passengers.
Be convinced of that replaced a seat belt after operation of the limiter of loading.


Fig. 8.71. Check of wear of a seat belt


If the car visited collision, extend a belt from a natyazhitel, examine it and be convinced that the belt has no wear tracks (the limiter of loading did not work) (fig. 8.71).
If it not so, replace a seat belt.

«previous page
8.1.18.5. Removal and installation of a back buckle
following page»
8.1.19. Seats