Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.1.1. A car design with a body "sedan"
8.1.2. A car design with a body "hatch-back"
8.1.3. Body framework
8.1.4. Hinged and decorative components of a body
8.1.5. Doors
8.1.6. Window regulators
8.1.7. Dismantling and trunk lid assembly
8.1.8. Removal and installation of a front bumper
8.1.9. Dismantling and assembly of a front bumper
8.1.10. Removal and installation of a rear bumper
8.1.11. Removal and installation of a back slip
8.1.12. Removal and installation of a back spoiler
8.1.13. External rear-view mirrors
8.1.14. Removal and installation of an external mirror with the electric drive
8.1.15. Dismantling and assembly of an external mirror with the electric drive
8.1.16. Heater of back glass
8.1.17. The hatch on a roof
8.1.18. Seat belts
8.1.19. Seats
8.2. Conditioner and heater
 




e31569a4

8-1-10-snyatie-i-ustanovka-zadnego-bampera.html

8.1.10. Removal and installation of a rear bumper

Disconnect a negative wire of the storage battery.
Remove the back combined lamp.

Detachment of the lock of a bumper
Fig. 8.42. Detachment of the lock of a bumper


Take away edges of a rear bumper (a wheel niche) outside to uncouple bumper locks (fig. 8.42).

Removal of a front bumper
Fig. 8.43. Removal of a front bumper: 1–screw A; 2–screw B; 3–screw C; 4–A connector; 5–A bolt; 6–B connector; 7–rear bumper; 8–reflector; 9–B bolt; 10-amplifier of a rear bumper


Remove in an order shown in drawing 8.43.
Remove a rear bumper.
Take away edges of a rear bumper (a wheel niche) outside.
Attach a rear bumper to a body.
Press on connecting parts of a rear bumper in the direction to a body to insert them into bumper locks.
Establish as it should be, the return to removal.

«previous page
8.1.9. Dismantling and assembly of a front bumper
following page»
8.1.11. Removal and installation of a back slip