Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Brake hoses
6.2.4. Air removal from brake system
6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.6. Check of a pedal of a brake
6.2.7. Removal and installation of a pedal of a brake
6.2.8. Removal and installation of the main brake cylinder
6.2.8.1. Removal
6.2.8.2. Installation
6.2.9. Check of the sensor of level of liquid
6.2.10. Dismantling and assembly of the main cylinder
6.2.11. Removal and installation of a forward brake disk
6.2.12. Replacement of forward brake shoes
6.2.13. Check of lay brake system
6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
7. Onboard electric equipment
8. Body
 






buy cialis online

6-2-8-1-snyatie.html

6.2.8.1. Removal

ATTENTION
Do not allow hit of brake liquid on the painted surfaces. At hit of brake liquid on the painted surface wash away it immediately.

Merge brake liquid.
Disconnect the socket of the sensor of level of brake liquid.
Disconnect brake магастраль, disconnect brake tubes from the main brake cylinder.
Unscrew two nuts of fastening, remove the union, the main brake cylinder and laying.

Fig. 6.21. Dismantling components of the main brake cylinder: 1–socket of the sensor of level brake liquids; 2–brake highway; 3–a hose (models with a mechanical transmission); 4–main cylinder; 5–sealing ring




«previous page
6.2.8. Removal and installation of the main brake cylinder
following page»
6.2.8.2. Installation