Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Brake hoses
6.2.4. Air removal from brake system
6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.6. Check of a pedal of a brake
6.2.7. Removal and installation of a pedal of a brake
6.2.8. Removal and installation of the main brake cylinder
6.2.9. Check of the sensor of level of liquid
6.2.10. Dismantling and assembly of the main cylinder
6.2.11. Removal and installation of a forward brake disk
6.2.12. Replacement of forward brake shoes
6.2.13. Check of lay brake system
6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
7. Onboard electric equipment
8. Body
 







6-2-2-proverka-urovnya-tormoznojj-zhidkosti-v-bachke-gidroprivoda-rabochejj-tormoznojj-sistemy.html

6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system

The tank for brake liquid is located in a motor compartment.
The tank has the transparent case therefore level of brake liquid can be supervised outside.
Level of brake liquid should be always closer to a label "MOVE".
If level of brake liquid too low, before removal of a stopper from a compensatory tank pure rags wipe a stopper and a place about a stopper from pollution to exclude dirt hit in a hydraulic contour of brakes.
Add the recommended brake liquid in a tank. Mixing of various types of brake liquid can damage hydraulic system.

Table 6.6 Working liquids of brake system

«previous page
6.2.1. Check and adjustment of elements of brake system
following page»
6.2.3. Brake hoses