Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Brake hoses
6.2.4. Air removal from brake system
6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.6. Check of a pedal of a brake
6.2.7. Removal and installation of a pedal of a brake
6.2.8. Removal and installation of the main brake cylinder
6.2.9. Check of the sensor of level of liquid
6.2.10. Dismantling and assembly of the main cylinder
6.2.10.1. Dismantling
6.2.10.2. Assembly
6.2.11. Removal and installation of a forward brake disk
6.2.12. Replacement of forward brake shoes
6.2.13. Check of lay brake system
6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
7. Onboard electric equipment
8. Body
 

6-2-10-razborka-i-sborka-glavnogo-cilindra.html

6.2.10. Dismantling and assembly of the main cylinder





ATTENTION
If the case of the main cylinder is damaged, replace the main cylinder assembled. When fastening the main cylinder in a vice, clamp only a ledge of the main cylinder (fig. 6.28).
«previous page
6.2.9. Check of the sensor of level of liquid		 following page»
6.2.10.1. Dismantling