Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Brake hoses
6.2.4. Air removal from brake system
6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.6. Check of a pedal of a brake
6.2.7. Removal and installation of a pedal of a brake
6.2.8. Removal and installation of the main brake cylinder
6.2.9. Check of the sensor of level of liquid
6.2.10. Dismantling and assembly of the main cylinder
6.2.11. Removal and installation of a forward brake disk
6.2.12. Replacement of forward brake shoes
6.2.13. Check of lay brake system
6.2.13.1. Adjustment of lay brake system
6.2.13.2. Removal and installation of lay brake system
6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
7. Onboard electric equipment
8. Body
 






6-2-13-2-snyatie-i-ustanovka-stoyanochnojj-tormoznojj-sistemy.html

6.2.13.2. Removal and installation of lay brake system

Remove the central console.
Remove a pillow of back sitting (4SD) or back sitting.
Remove an arm of an exhaust pipe.
Remove the socket of the switch of lay brake system.
Turn off an adjusting nut, bolts of fastening of the lever of the parking brake and remove the lever assembled.
Establish as it should be, the return to removal.
Adjust a course of the lever of lay brake system.

«previous page
6.2.13.1. Adjustment of lay brake system
following page»
6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS