Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Brake hoses
6.2.4. Air removal from brake system
6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.6. Check of a pedal of a brake
6.2.7. Removal and installation of a pedal of a brake
6.2.8. Removal and installation of the main brake cylinder
6.2.9. Check of the sensor of level of liquid
6.2.10. Dismantling and assembly of the main cylinder
6.2.11. Removal and installation of a forward brake disk
6.2.12. Replacement of forward brake shoes
6.2.13. Check of lay brake system
6.2.13.1. Adjustment of lay brake system
6.2.13.2. Removal and installation of lay brake system
6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
7. Onboard electric equipment
8. Body
 






6-2-13-1-regulirovka-stoyanochnojj-tormoznojj-sistemy.html

6.2.13.1. Adjustment of lay brake system

Start the engine and press several times a brake pedal.
Stop the engine.
Remove an ashtray behind the central console.

Fig. 6.48. Adjusting nut of lay brake system


Turn an adjusting nut, as is shown in drawing 6.48.
After adjustment make the following:
– turn the ignition key in the situation ON, extend the lever of the parking brake on one click and be convinced that the lamp of the alarm system of lay brake system lights up;
– be convinced that back brake mechanisms do not block a wheel.

«previous page
6.2.13. Check of lay brake system
following page»
6.2.13.2. Removal and installation of lay brake system