Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.1.1. A car design with a body "sedan"
8.1.2. A car design with a body "hatch-back"
8.1.3. Body framework
8.1.4. Hinged and decorative components of a body
8.1.5. Doors
8.1.6. Window regulators
8.1.6.1. Main characteristics
8.1.6.2. The window regulator electric motor with the servo-driver
8.1.6.3. System of the servo-driver of locks of doors
8.1.6.4. Removal and installation of a regulator of a window regulator with the servo-driver
8.1.6.5. Removal and installation of the electric motor of a window regulator with the servo-driver
8.1.7. Dismantling and trunk lid assembly
8.1.8. Removal and installation of a front bumper
8.1.9. Dismantling and assembly of a front bumper
8.1.10. Removal and installation of a rear bumper
8.1.11. Removal and installation of a back slip
8.1.12. Removal and installation of a back spoiler
8.1.13. External rear-view mirrors
8.1.14. Removal and installation of an external mirror with the electric drive
8.1.15. Dismantling and assembly of an external mirror with the electric drive
8.1.16. Heater of back glass
8.1.17. The hatch on a roof
8.1.18. Seat belts
8.1.19. Seats
8.2. Conditioner and heater
 






8-1-6-1-osnovnye-kharakteristiki.html

8.1.6.1. Main characteristics

Fig. 8.29. Mazda 6 car window regulators: 1–party of the driver; 2–the main switch of a window regulator with the servo-driver; 3–except the party of the driver; 4–the window regulator switch with the servo-driver; 5–the window regulator electric motor with the servo-driver; 6–a window regulator regulator with the servo-driver; 7–door switch


On the basis of pulse signals from contactless switches on the Hall sensor in the window regulator electric motor with the servo-driver the module of management of a window regulator in its main switch defines the provision of a window and the direction of movement of glass. Respectively, the main switch operates system of the servo-driver of window regulators from the driver (fig. 8.29).

Fig. 8.30. Assembly diagram of electrowindow regulators: 1–the main switch of a window regulator with the servo-driver; 2–manual closing; 3–manual opening; 4–AUTO; 5–switch of interruption of supply of the electric power; 6–it is closed; 7–openly; 8–closing relay; 9–opening relay; 10-the window regulator switch with the servo-driver; 11-the forward electric motor of a window regulator with the servo-driver (the party of the driver); 12-the contactless switch on the Hall No. 1 sensor; 13-the contactless switch on the Hall No. 2 sensor; 14-the forward electric motor of a window regulator with the servo-driver (the party of the passenger); 15-the electric motor of a back window regulator with the servo-driver (right side); 16-the electric motor of a back window regulator with the servo-driver (left side); 17-the electric motor with system of the servo-driver of back window regulators; 18-door switch (party of the driver); 19-door switch (party of the passenger); 20-door switch (the back right side); 21-door switch (the back left side)


When the starting position is established before car transfer, the provision of glass of a window and the direction of work are remembered in the management module in the main switch of a window regulator with the servo-driver. Thus, adjustment of a starting position is necessary if were disconnected: a cable – from a negative conclusion of the storage battery, the socket of the main switch or the socket of the electric motor of a window regulator with the servo-driver (fig. 8.30).

NOTE
If the starting position was not established, functions of automatic work of system of the servo-driver of window regulators from the driver, automatic return of glass and exact moving will not be available.

«previous page
8.1.6. Window regulators
following page»
8.1.6.2. The window regulator electric motor with the servo-driver