8.1.5.6. Removal and installation of the block of a back door

Remove glass of a back door.

Remove the internal handle.

Remove the loudspeaker of a back door.

Disconnect the socket of the electric motor of a window regulator with the servo-driver and the automatic socket of the executive mechanism of the lock of a door.

Remove a plait of a back door from the block of a back door.

Unscrew bolts.

Remove a hook of the executive mechanism of the lock of a door from its block.

Fig. 8.27. Removal of the block of a forward door

Pull the block of a back door a little to itself, let's be latched by a window regulator regulator with the servo-driver on it, take out the block from a door (fig. 8.27).

Take out an internal cable of the handle and a cable of the button of the lock of a door from an opening.

Fig. 8.28. Removal of the handle of a regulator and stklopodjemnik

If your car is equipped with system of window regulators with the servo-driver, remove the electric motor and a window regulator regulator with the servo-driver from the door block. If the car is not equipped with system of window regulators with the servo-driver, remove the handle of a regulator and a window regulator (fig. 8.28).

Establish as it should be, the return to removal.