Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Brake hoses
6.2.4. Air removal from brake system
6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.6. Check of a pedal of a brake
6.2.7. Removal and installation of a pedal of a brake
6.2.7.1. Removal
6.2.7.2. Installation
6.2.8. Removal and installation of the main brake cylinder
6.2.9. Check of the sensor of level of liquid
6.2.10. Dismantling and assembly of the main cylinder
6.2.11. Removal and installation of a forward brake disk
6.2.12. Replacement of forward brake shoes
6.2.13. Check of lay brake system
6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
7. Onboard electric equipment
8. Body
 






6-2-7-2-ustanovka.html

6.2.7.2. Installation

Establish as it should be, the return to removal, taking into account the following.
Fix the switch of signals of braking on an arm with pressing in 50 N.

Fig. 6.20. Povorachivaniye of the switch of signals of braking on 45 °


Turn the switch of signals of braking on 45 ° counter-clockwise (fig. 6.20).
Check that the switch of signals of braking is reliably blocked.

NOTE
Adjustment of a gap of a bolt of the limiter and the pedal limiter after the switch of signals of braking is reliably blocked, it is not required.

«previous page
6.2.7.1. Removal
following page»
6.2.8. Removal and installation of the main brake cylinder