Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Brake hoses
6.2.4. Air removal from brake system
6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.6. Check of a pedal of a brake
6.2.6.1. Check of height of provision of a pedal of a brake
6.2.6.2. Adjustment of height of provision of a pedal of a brake
6.2.6.3. Check of a gap of a pedal of a brake
6.2.6.4. Adjustment of a gap of a pedal of a brake
6.2.6.5. Gap check pedal floor
6.2.6.6. Check of the switch of signals of braking
6.2.7. Removal and installation of a pedal of a brake
6.2.8. Removal and installation of the main brake cylinder
6.2.9. Check of the sensor of level of liquid
6.2.10. Dismantling and assembly of the main cylinder
6.2.11. Removal and installation of a forward brake disk
6.2.12. Replacement of forward brake shoes
6.2.13. Check of lay brake system
6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
7. Onboard electric equipment
8. Body
 







6-2-6-5-proverka-zazora-pedal-pol.html

6.2.6.5. Gap check pedal floor

Start the engine and press a brake pedal with the force equal of 588 N.

Fig. 6.17. Gap check pedal floor


Be convinced of that the distance from the floor panel to the center of a basic platform of a pedal corresponds to norm at the pressed pedal (fig. 6.17).
If distance less norm, check lack of air in brake system.
Gap size, minimum – 68 mm.

«previous page
6.2.6.4. Adjustment of a gap of a pedal of a brake
following page»
6.2.6.6. Check of the switch of signals of braking