Mazda 6 since 2002
	1. Operation and car maintenance
	2. Engine
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
		6.1. General information
		6.2. Brake system
			6.2.1. Check and adjustment of elements of brake system
			6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
			6.2.3. Brake hoses
			6.2.4. Air removal from brake system
			6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
			6.2.6. Check of a pedal of a brake
			6.2.7. Removal and installation of a pedal of a brake
			6.2.8. Removal and installation of the main brake cylinder
			6.2.9. Check of the sensor of level of liquid
			6.2.10. Dismantling and assembly of the main cylinder
			6.2.11. Removal and installation of a forward brake disk
			6.2.12. Replacement of forward brake shoes
			6.2.13. Check of lay brake system
			6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
				6.2.14.1. Gap check between the sensor of speed of a wheel and a sensor rotor
				6.2.14.2. Resistance check
				6.2.14.3. Tension check
				6.2.14.4. Check of a form of a signal
	7. Onboard electric equipment
	8. Body

6-2-14-2-proverka-soprotivleniya.html

6.2.14.2. Resistance check

Disconnect the socket of the sensor of speed of a wheel of anti-blocking system of brakes.

Turn off bolts of arms of fastening and disconnect the ABS sensor.

Check resistance of the sensor of speed of a wheel of anti-blocking system of brakes.

If resistance does not correspond to norm, replace the sensor of speed of a wheel of anti-blocking system of brakes.

Resistance: 1,3–1,7 kiloohms.