Mazda 6 since 2002
	1. Operation and car maintenance
	2. Engine
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
		6.1. General information
		6.2. Brake system
			6.2.1. Check and adjustment of elements of brake system
			6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
			6.2.3. Brake hoses
			6.2.4. Air removal from brake system
			6.2.5. Check of the return valve of a vacuum hose (amplifier of brakes)
			6.2.6. Check of a pedal of a brake
			6.2.7. Removal and installation of a pedal of a brake
			6.2.8. Removal and installation of the main brake cylinder
			6.2.9. Check of the sensor of level of liquid
			6.2.10. Dismantling and assembly of the main cylinder
			6.2.11. Removal and installation of a forward brake disk
			6.2.12. Replacement of forward brake shoes
				6.2.12.1. Visual check of thickness of blocks
				6.2.12.2. Removal of brake shoes
			6.2.13. Check of lay brake system
			6.2.14. Removal, check and installation of the back sensor of speed of a wheel of ABS
	7. Onboard electric equipment
	8. Body

6-2-12-1-vizualnaya-proverka-tolshhiny-kolodok.html

6.2.12.1. Visual check of thickness of blocks

Fig. 6.39. Visual check of thickness of brake shoes

Check thickness of blocks. For this purpose lift the car, remove a wheel and look through a viewing opening in the cylinder case (fig. 6.39).

Minimum thickness of brake shoes: 1мм.

Limiting wear: 2,0 mm.