Mazda 6 since 2002
1. Operation and car maintenance
1.1. Car description
1.2. System of passive safety
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.2. Engine overheat
1.4.3. Car evacuation
1.4.4. General information and security measures at control survey and car maintenance
1.4.5. Lamps of devices of lighting and light alarm system
1.4.5.1. Replacement of xenon lamps
1.4.5.2. Replacement of halogen lamps
1.4.5.3. Replacement of lamps of headlights of a driving beam
1.4.5.4. Replacement of lamps of headlights of a passing beam
1.4.5.5. Replacement of lamps of forward fog lights and lamps of forward dimensional lamps
1.4.5.6. Replacement of lamps of forward indexes of turn
1.4.5.7. Replacement of lamps of lateral repeaters of indexes of turn
1.4.5.8. Replacement of lamps of stoplights / back dimensional lamps, lamp of back indexes of turn
1.4.5.9. Replacement of lamps of a lamp of a backing and a back antifog lamp (cars with a body "sedan")
1.4.5.10. Replacement of a lamp of the central top stoplight (cars with a body "sedan")
1.4.5.11. Replacement of a lamp of a lamp of illumination of a registration sign
1.4.5.12. Replacement of a lamp of the top plafond of a publicizing / lamps of local lighting
1.4.5.13. Electric safety locks
1.4.5.14. Replacement of safety locks
1.4.6. Care of a body and car salon
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 






1-4-5-4-zamena-lamp-far-blizhnego-sveta.html

1.4.5.4. Replacement of lamps of headlights of a passing beam

1. Check, that the main switch of lighting was in situation "Is switched off".
2. Lift a cowl and define from the back party of the case of a block headlight an arrangement of the lamps established in headlights of a driving and passing beam.
The lamp located with edge, belongs to a headlight of a passing beam, and a lamp located closer to the center of the car, – a headlight of a driving beam.
3. At lamp replacement in the right headlight start the engine and turn a steering wheel against the stop to the left. Then muffle the engine. If you replace a lamp in the left headlight, turn a steering wheel against the stop to the right.

Fig. 1.195. Screws of fastening of an antisplash casing


4. Unscrew screws, rotating them counter-clockwise, and partially dismantle an antisplash casing (fig. 1.195).
5. Turn a sealing cover counter-clockwise and remove it.
6. Disconnect the electric socket from a lamp, having pulled it back.

Fig. 1.196. Detachment of the spring holder of a lamp


7. Unfasten the spring holder of a lamp (fig. 1.196).
8. Take the spring holder aside to release a lamp.
9. Carefully take out a lamp from a nest, having pulled it back.
10. Replace a lamp.
11. Establish all details into place, having executed described above operation in return sequence.

«previous page
1.4.5.3. Replacement of lamps of headlights of a driving beam
following page»
1.4.5.5. Replacement of lamps of forward fog lights and lamps of forward dimensional lamps