1.4.5.3. Replacement of lamps of headlights of a driving beam

1. Check, that the main switch of lighting was in situation "Is switched off".

2. Lift a cowl and define from the back party of the case of a block headlight an arrangement of the lamps established in headlights of a driving and passing beam.

The lamp located with edge, belongs to a headlight of a passing beam, and a lamp located closer to the center of the car, – a headlight of a driving beam.

Fig. 1.193. Detachment of the electric socket

3. Disconnect the electric socket (fig. 1.193).

4. Lift the air purifier case.

5. Press the pad of a clamp located from above of a sealing cover and uncover.

6. Disconnect the electric socket from a lamp, having pulled it back.

Fig. 1.194. Detachment of the spring holder of a lamp

7. Unfasten the spring holder of a lamp (fig. 1.194).

8. Take away the spring holder up to release a lamp.

9. Carefully take out a lamp from a nest, having pulled it back.

10. Replace a lamp.

11. Establish all details into place, having executed described above operation in return sequence.

NOTE – After installation to the place of the case of an air purifier check reliability of connection of the electric socket. – After connection of the electric socket insert an electric plait in the holder located sideways on the case of an air purifier. – Pack fused lamp into a box from under a new lamp. Throw out overheated lamps in the places inaccessible to children.