Mazda 6 since 2002
1. Operation and car maintenance
1.1. Car description
1.2. System of passive safety
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.2. Engine overheat
1.4.3. Car evacuation
1.4.4. General information and security measures at control survey and car maintenance
1.4.5. Lamps of devices of lighting and light alarm system
1.4.5.1. Replacement of xenon lamps
1.4.5.2. Replacement of halogen lamps
1.4.5.3. Replacement of lamps of headlights of a driving beam
1.4.5.4. Replacement of lamps of headlights of a passing beam
1.4.5.5. Replacement of lamps of forward fog lights and lamps of forward dimensional lamps
1.4.5.6. Replacement of lamps of forward indexes of turn
1.4.5.7. Replacement of lamps of lateral repeaters of indexes of turn
1.4.5.8. Replacement of lamps of stoplights / back dimensional lamps, lamp of back indexes of turn
1.4.5.9. Replacement of lamps of a lamp of a backing and a back antifog lamp (cars with a body "sedan")
1.4.5.10. Replacement of a lamp of the central top stoplight (cars with a body "sedan")
1.4.5.11. Replacement of a lamp of a lamp of illumination of a registration sign
1.4.5.12. Replacement of a lamp of the top plafond of a publicizing / lamps of local lighting
1.4.5.13. Electric safety locks
1.4.5.14. Replacement of safety locks
1.4.6. Care of a body and car salon
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 






canada pharmacies without script

1-4-5-14-zamena-predokhranitelejj.html

1.4.5.14. Replacement of safety locks

Replacement of the safety locks located in the left block in salon.
If the electric equipment of the car does not work, first of all check the safety locks located in the left block (about the basis of a forward left rack of a body).
1. Turn the switch of ignition and other switches in situation "Is switched off".

Fig. 1.203. Removal of a cover of the block of safety locks


2. Uncover the block of safety locks. For this purpose press a cover in the direction of an arrow and shift it back (fig. 1.203).
3. Take out a safety lock from a nest by means of nippers which are located in the block of safety locks in a motor compartment.

Fig. 1.204. An example of the serviceable and fused safety lock


4. Check a safety lock condition. If the safety lock fused, replace it new (fig. 1.204).
5. Insert into a nest the new safety lock calculated on the same size of rated current. Check, that the safety lock densely kept in a nest. If the safety lock is inserted not densely, address on service station of the official dealer of Mazda for check. If the spare safety lock of demanded face value is absent, as a temporary measure it is possible to take the necessary safety lock protecting the electric device which essentially does not influence car functioning (for example, a safety lock from a nest «MIRROR» (mirror) or «CIGAR» (lighter)).

ATTENTION
Always replace fused safety lock on serviceable which is calculated on the same size of rated current. Otherwise you can put out of action system of the electric equipment of the car.

Replacement of safety locks in the podkapotny block.
If forward headlights or other electric devices do not work, and the safety locks located in salon are serviceable, check a condition of safety locks in the podkapotny block. If the safety lock fused, it is necessary to replace it. Execute the following operations.
1. Turn the switch of ignition and other switches in situation "Is switched off".

Fig. 1.205. Removal of a cover of the block of safety locks


2. Uncover the block of safety locks (fig. 1.205).
3. If the safety lock fused, replace it new, calculated on the same size of rated current.

NOTE
For replacement of a safety lock of "MAIN" (main) address on service station of the official dealer of Mazda

«previous page
1.4.5.13. Electric safety locks
following page»
1.4.6. Care of a body and car salon