1.1.12.8. Use of buttons in the seat basis

Programming.

Programming of parameters of individual control of a seat is possible only on the motionless car.

1. Establish a seat in demanded situation.

2. Having pressed and holding the SET button, at the same time press one of buttons 1-3 that the short sound signal was distributed.

Disconnection of the storage battery from an onboard network of the car (for example, at maintenance or for other reasons) leads to deleting of the programmed settings of a seat. In that case reprogram a memory of a driver's seat.

Turn the ignition switch in the situation "LOCK" (blocking), open a driver's door, then press one of buttons 1-3 which corresponds to demanded option of individual control of a driver's seat.

– Inclusion of automatic installation of a seat in the programmed situation is possible also at the included ignition (the switch of ignition will turn in the situation "ON") and the closed driver's door.

For this purpose press and hold in the pressed situation one of buttons which corresponds to demanded option of control of a seat.

– Function of automatic installation of a seat in the programmed situation is switched off in the following cases:

– by pressing any button of adjustment of a seat;

– at movement of the car or at a car troganiye from a place;

– by repeated pressing the same button 1-3 or the SET button.