|
3-4-4-1-proverka-zazora-v-podshipnike-stupicy-zadnego-kolesa.html
3.4.4.1. Gap check in the bearing of a nave of a back wheelRemove a back wheel.
Disconnect a forward support of a disk brake.
|
|
Fig. 3.118. Gap check in the bearing of a nave of a back wheel
|
Establish the indicator of hour type against a wheel nave (fig. 3.118). Moving a wheel nave manually in the axial direction, measure a gap in the nave bearing.
At most: 0,05 mm.
If the gap exceeds a maximum replace the bearing.
|
ATTENTION
Performance of the following procedures without preliminary removal of the sensor of speed of a wheel of anti-blocking system of brakes can lead to chain break in a plait of wires if the plait is by mistake tense. Before performance of the following operations remove the sensor of speed of a wheel of anti-blocking system of brakes (from a body) and fix it in a suitable place where the sensor will not be by mistake damaged at service performance.
|
|