Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
4.1. General information
4.2. Wheels and tires
4.2.1. Adjustment of corners of installation of wheels
4.2.2. Balancing of wheels (16-inch and 17-inch cast light-alloy wheels)
4.2.2.1. Being glued balancing cargo (external)
4.2.2.2. Installation of cargo of usual type (internal)
4.2.2.3. Check of size of a residual imbalance
4.3. Forward suspension bracket
4.4. Back suspension bracket
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







4-2-2-2-ustanovka-gruza-obychnogo-tipa-vnutrennego.html

4.2.2.2. Installation of cargo of usual type (internal)

Measure imbalance size on the machine for balancing of wheels.

Fig. 4.14. Scheme of installation of usual balancing cargo


Establish the cargo corresponding to the measured size of the imbalance, in situation (on an internal part of a rim), specified by the machine for balancing of wheels (fig. 4.14).

ATTENTION
– Do not establish more than three cargoes.
– The mass of one cargo should not exceed 60 g.
– The lump of two cargoes should not exceed 100 g.


«previous page
4.2.2.1. Being glued balancing cargo (external)
following page»
4.2.2.3. Check of size of a residual imbalance