Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General information
3.2.2. Check and oil replacement in a mechanical transmission
3.2.3. Removal and installation of the sensor of a speedometer of the car (without anti-blocking system of brakes)
3.2.4. Epiploon replacement (differential)
3.2.5. Removal and installation of the mechanism of gear shifting
3.2.6. Coupling case, dismantling of elements of a case of the main transfer
3.2.7. Check and assembly of components of differential and case of the main transfer
3.3. Automatic transmission
3.4. Driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 




e31569a4

3-2-4-zamena-salnika-differencial.html

3.2.4. Epiploon replacement (differential)

Establish the car on a horizontal surface, lift on a jack and lower on support.
Merge oil from a transmission.
Remove forward wheels and mudguards.
Separate driving and connecting shaft from a transmission in the block with the main transfer.

Removal of an epiploon of differential
Fig. 3.27. Removal of an epiploon of differential


Remove epiploons, using a screw-driver (fig. 3.27).

Installation of an epiploon of differential
Fig. 3.28. Installation of an epiploon of differential


Using the special adaptation and a hammer, evenly press a new epiploon while the special adaptation will not rest against a case of the main transfer (fig. 3.28).
Cover a working edge of each epiploon with oil for a transmission.
Insert driving and connecting shaft in a transmission in the block with the main transfer.
Establish wheels and mudguards.
Add necessary amount of oil of demanded type.

«previous page
3.2.3. Removal and installation of the sensor of a speedometer of the car (without anti-blocking system of brakes)
following page»
3.2.5. Removal and installation of the mechanism of gear shifting