Mazda 6 since 2002
1. Operation and car maintenance
1.1. Car description
1.2. System of passive safety
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.2. Engine overheat
1.4.3. Car evacuation
1.4.4. General information and security measures at control survey and car maintenance
1.4.5. Lamps of devices of lighting and light alarm system
1.4.6. Care of a body and car salon
1.4.6.1. Protection against corrosion
1.4.6.2. Corrosion prevention
1.4.6.3. Sink and drawing of wax paste
1.4.6.4. Removal of spots
1.4.6.5. Polishing and drawing of wax paste
1.4.6.6. Repeated drawing of wax paste
1.4.6.7. Care of bumpers
1.4.6.8. Cleaning of salon of the car
1.4.6.9. Upholstery cleaning from a genuine leather (the additional equipment)
1.4.6.10. Cleaning of carpets
1.4.6.11. Cleaning of seat belts
1.4.6.12. Sink of glasses
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 






1-4-6-3-mojjka-i-nanesenie-voskovojj-pasty.html

1.4.6.3. Sink and drawing of wax paste

The wash of the car when its surface is heated up by sunshine, is inadmissible. Always wash the car in a shadow.
Wash the car as it is possible more often. Dirt is an abrasive material and can scratch the car if it not to wash away. The polluted air or an acid rain can damage a paint and varnish covering during chemical reaction if to leave their deposit to contact to a car surface. If you live at the sea or in the region (country) where road salt or chemicals for care of roads is used, you should give particular attention to the bottom of your car.
In winter time or after driving on the dirty wet road carefully wash out the car bottom. to remove stratifications of dirt and corrosion and active materials, use a strong stream of water. Use high-quality shampoo for a wash of the car and follow instructions of his manufacturer on packing. Shampoo can be got at the official dealer of Hyundai or in autoshop. Do not use strong household cleaners, gasoline, solvents and abrasive cleaners as it can damage a paint and varnish covering of the car. Use a pure sponge or a fabric, often moistening it, and do not damage a paint and varnish covering too strong friction. If dirt dried, plentifully moisten and accurately remove it.
For a sink of wheels use a soft brush or the rag moistened in neutral washing solution from rough wool.
For cleaning of plastic wheel caps use a pure sponge or a soft fabric and water.
Wash aluminum rims with weak neutral washing solution or neutral detergent. Do not use abrasive cleaners. Protect unprotected metal surfaces by a sink, polishings and drawings of wax paste. As aluminum is subject to corrosion, in the winter pay to aluminum rims special attention. After driving on the roads covered with salt, carefully wash such rims.
After a wash of the car carefully it wipe. After drying soap water leaves stains on paint.
At warm weather and low humidity probably you will need to wipe at once each detail of the car after a sink not to leave stains on paint.
After rubbing wipe the car dry. It is necessary for water removal from a paint and varnish covering on it there were no spots. Do not rub strongly, it can damage a paint and varnish covering.
At detection of dents or scratches on a paint and varnish covering cover them with repair paint to prevent emergence of corrosion. For protection of a paint and varnish covering against corrosion, you should wash the car, at least once a month. Give particular attention to removal of salt, dirt and other substances from under car wings. Be convinced that drainage openings are free. Damage of a paint and varnish covering can be caused by tar spots, production emissions, charcoal and remains of insects if all this is not immediately removed. If simple water is insufficiently effective for removal of the collected dirt, use neutral solutions for a car wash. For solution removal after a sink surely wipe the car. Do not allow solution drying on a paint and varnish covering of the car.

«previous page
1.4.6.2. Corrosion prevention
following page»
1.4.6.4. Removal of spots