Mazda 6 since 2002
1. Operation and car maintenance
1.1. Car description
1.2. System of passive safety
1.2.1. Seat belts
1.2.1.1. Instructions on use of seat belts
1.2.1.2. Mode of automatic blocking of delivery of a belt
1.2.1.3. Seat belts (except the central seat belt on back sitting)
1.2.1.4. Otstegivaniye of a seat belt
1.2.1.5. Adjustment of a humeral strap of a belt on height
1.2.1.6. Pyrotechnic prednatyazhitel and limiters of loading of the seat belts established on forward seats
1.2.1.7. The central seat belt on back sitting (a diagonal and zone belt)
1.2.1.8. Cars with bodies "sedan" and "hatch-back"
1.2.1.9. Cars with bodies "versatile person"
1.2.1.10. Signaling device of malfunction of system of safety cushions and prednatyazhitel of seat belts
1.2.1.11. Safety of children
1.2.1.12. Installation sites of children's holding devices
1.2.1.13. Installation of children's holding devices
1.2.1.14. Installation of children's holding devices with standard fastening of ISOFIX
1.2.2. Safety cushions – SRS system
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 






1-2-1-13-montazh-detskikh-uderzhivayushhikh-ustrojjstv.html

1.2.1.13. Installation of children's holding devices

At installation of the children's holding device carry out all instructions of the manufacturer of a concrete product.

Installation of the children's holding device on back sitting (with fastening by a seat belt in a mode of automatic blocking).
In order that it is reliable to fix the children's holding device a seat belt which is transferred to a mode of automatic blocking, follow the instructions provided below.
1. Be convinced of reliable fixing of a back of a back seat. For this purpose press a seat back back before clamp operation.
2. Fix the children's holding device by means of a zone strap of a diagonal and zone seat belt. Instructions on seat belt conducting see on a label on the children's holding device.

Fig. 1.142. Seat belt pulling


3. To switch the inertial coil of a seat belt in a mode of automatic blocking of delivery of a belt, completely extend from the coil a seat belt (fig. 1.142).
4. Densely establish the children's holding device on sitting in the car. Be convinced that the seat belt is tense and completely cleaned on the inertial coil. If the inertial coil is switched in an automatic mode of blocking, at belt delivery on the coil clicks will be audible. If the seat belt did not draw and did not press densely children's holding device to a seat, it is necessary to execute this operation anew.

NOTE
Check automatic blocking of a seat belt before each use of the children's holding device. If the inertial coil is switched in a mode of automatic blocking, the seat belt should not stand out in attempt to extend it from the coil. After dismantle of the children's holding device completely hand over a seat belt on the inertial coil to switch it in a mode of emergency blocking of a belt. Check normal functioning of a seat belt before putting on this place of the passenger.


Fig. 1.143. An arrangement of a fixing bracket and the top strap on cars with a body "sedan"


Fig. 1.144. An arrangement of a fixing bracket and the top strap on cars with bodies "hatch-back" and "versatile person"


5. If the design of the children's holding device provides its fastening by means of the top strap, lift a head restraint, hook on a strap for a fixing bracket and pull a strap. Follow instructions of the manufacturer of the children's holding device (fig. 1.143).

«previous page
1.2.1.12. Installation sites of children's holding devices
following page»
1.2.1.14. Installation of children's holding devices with standard fastening of ISOFIX