|
2-3-4-2-snyatie-i-ustanovka-sistemy-vypuska.html
2.3.4.2. Removal and installation of system of releaseDisconnect a negative wire of the storage battery.
Remove the main exhaust silencer.
Remove an average pipe.
Remove three-componental catalytic converter.
Remove the top thermal screen of a final collector with an arm.
|
|
Fig. 2.224. Order of untwisting of bolts of fastening of a final collector
|
Turn off 7 bolts of fastening of a final collector as it should be, the return specified in drawing 2.224. Remove laying of a final collector.
Remove the bottom thermal screen of a final collector.
Remove the forward sensor of concentration of oxygen with heating.
Remove the back sensor of concentration of oxygen with heating.
|
|
Fig. 2.225. Removal of the sensor of concentration of oxygen with heating with use of the special tool
|
|
NOTE
Sensors of concentration of oxygen with heating remove using the special tool (fig. 2.225).
|
Installation carry out as it should be, the return to removal.
|