188.8.131.52. Removal, check and installation of the pump of cooling liquid
Disconnect a negative wire of the storage battery.
Merge cooling liquid of the engine.
Weaken a bolt of a pulley of the pump of cooling liquid to remove a driving belt.
Remove a pulley of the pump of cooling liquid.
Remove the pump of cooling liquid.
Carry out visual check and be convinced that on the case and blades of the water pump there is no considerable pollution or a rust.
Be convinced that on lopastny to a shaft is not present люфта and that it rotates freely by hand.
Installation make as it should be, the return to removal.
Again fill in cooling liquid in the engine.
|Fig. 2.217. Removal of the pump of cooling liquid: 1–a pulley of the pump of cooling liquid; 2–the pump of cooling liquid; 3–sealing ring; 4-bolts of fastening of the pump
Be convinced of absence of leakage of cooling liquid.