Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.2.1. Engines of the L8 and LF models
2.2.2. Verification of the contents WITH / SN in the fulfilled gases
2.2.3. Compression measurement in engine cylinders
2.2.4. Check of a belt of a drive of auxiliary units
2.2.5. General information and safety measures at removal of the power unit
2.2.6. Hermetic removal
2.2.7. Removal and installation of the power unit
2.2.8. Check of the executive mechanism of change of phases of a gazoraspredeleniye (L3)
2.2.9. Removal and installation of the executive mechanism of change of phases of a gazoraspredeleniye (L3)
2.2.10. Chain of a drive of the mechanism of a gazoraspredeleniye
2.2.11. Removal and installation of the operating oil valve (OCV) (L3)
2.2.12. Check of the operating oil valve (OCV) (L3)
2.2.13. Check of operation of the zolotnikovy valve (OCV) (L3)
2.2.14. The general repair operations on the power unit
2.2.14.1. Dismantling of a head of the block of cylinders (beginning)
2.2.14.2. Dismantling of a head of the block of cylinders (termination)
2.2.14.3. Dismantling of the block of cylinders (beginning)
2.2.14.4. Removal and installation of a back epiploon of a cranked shaft
2.2.14.5. Dismantling of the block of cylinders (termination)
2.2.15. Check of a head of the block of cylinders
2.2.16. Assembly of the block of cylinders (beginning)
2.2.17. Assembly of the block of cylinders (termination)
2.2.18. Assembly of a head of the block of cylinders
2.2.19. Assembly of a drive of the mechanism of a gazoraspredeleniye
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







2-2-14-1-razborka-golovki-bloka-cilindrov-nachalo.html

2.2.14.1. Dismantling of a head of the block of cylinders (beginning)

Fig. 2.120. Components of the first stage of dismantling of a head of the block of cylinders: 1–fixing bolts of asterisks of cam-shafts; 2–asterisks of cam-shafts; 3–the operating oil valve (OCV) (L3); 4–covers of cam-shafts; 5–cam-shafts; 6–valve pusher; 7–bolt of fastening of a head of the block of cylinders; 8–head of the block of cylinders; 9–laying of a head of the block of cylinders; 10-block of cylinders


Weaken bolts of fastening of asterisks of cam-shafts (see fig. 2.120) (a bolt of fastening of the mechanism of change of phases of a gazoraspredeleniye), as is shown in drawing 2.121.
Remove asterisks of camshafts. The executive mechanism of change of phases of a gazoraspredeleniye (L3 with the mechanism of change of phases of a gazoraspredeleniye).
Remove the operating oil valve (OCV) (L3 with the mechanism of change of phases of a gazoraspredeleniye).

Fig. 2.121. Weakening of bolts of fastening of asterisks of cam-shafts



Fig. 2.122. Sequence of weakening of bolts of fastening of covers of bearings of cam-shafts


Remove covers of bearings of camshafts, having weakened fastening bolts in three steps in an order specified in drawing 2.122.

NOTE
Before removal of covers of bearings of a cam-shaft check an axial gap of a camshaft and gaps in cam-shaft bearings (see further). Covers of bearings of a cam-shaft are numbered for ensuring correctness of the subsequent assembly. After removal, hold covers together with a head of the block of cylinders from which they were removed. Do not mix a cover.

Remove cam-shafts.
To Snimta pushers of valves.

NOTE
Pushers of valves are numbered for ensuring correctness of the subsequent assembly. After removal hold valve pushers together with a head of the block of cylinders from which they were removed. Do not mix pushers of valves.

Fig. 2.123. Sequence of weakening of bolts of fastening of a head of the block of cylinders


Weaken bolts of fastening of a head of the block of cylinders for two or three receptions in an order specified in drawing 2.123.

«previous page
2.2.14. The general repair operations on the power unit
following page»
2.2.14.2. Dismantling of a head of the block of cylinders (termination)