Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.1.1. Mechanical part of engines
2.1.2. Mechanism of change of phases of a gazoraspredeleniye
2.1.3. Greasing system
2.1.4. Cooling system
2.1.5. Fuel system
2.1.5.1. General information
2.1.5.2. Admission system
2.1.5.3. The main features of an air line with variable characteristics (VAD) (L3)
2.1.5.4. Executive mechanism of system (VAD) (L3)
2.1.5.5. Electromagnetic valve of system (VAD) (L3)
2.1.5.6. Return valve of system (VAD) (L3)
2.1.5.7. Fuel knot
2.1.5.8. Block of the fuel pump
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
2.1.7. Electric equipment of engines
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







2-1-5-7-toplivnyjj-uzel.html

2.1.5.7. Fuel knot

Fig. 2.61. Fuel knot of the Mazda 6 car: 1–fuel tank; 2–return valve; 3–block of the fuel pump; 4–fuel nozzle; 5–quencher of pulsations; 6–relay of the fuel pump; 7–control socket; 8–quick-detachable connector; 9–cover of a jellied mouth of a fuel tank


The fuel knot of the car consists of the block of the fuel pump of a high pressure, a fuel tank, fuel nozzles and fuel connecting tubes (топливопроводов). From a fuel tank the fuel pump under pressure submits fuel to the fuel highway, from where it through nozzles arrives in cylinders. Nozzles dose out and spray fuel. When giving tension the needle rises by a solenoid winding, passing fuel. The amount of fuel is defined by duration of an impulse during which the nozzle is open. Further fuel flows back in a fuel tank through two metal tubes located under the bottom of the car. The fuel pump is established in a fuel tank (fig. 2.61).

«previous page
2.1.5.6. Return valve of system (VAD) (L3)
following page»
2.1.5.8. Block of the fuel pump