Mazda 6 since 2002
1. Operation and car maintenance
1.1. Car description
1.2. System of passive safety
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.1.1. Vozimy jack
1.4.1.2. Zpasnoye wheel
1.4.1.3. Replacement of a faulty wheel
1.4.1.4. Dismantle of a faulty wheel
1.4.1.5. Installation of a spare wheel
1.4.2. Engine overheat
1.4.3. Car evacuation
1.4.4. General information and security measures at control survey and car maintenance
1.4.5. Lamps of devices of lighting and light alarm system
1.4.6. Care of a body and car salon
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







1-4-1-5-ustanovka-zapasnogo-kolesa.html

1.4.1.5. Installation of a spare wheel

1. Clear rags of dirt privalochny surfaces on a disk of a wheel and a nave, and also hairpins.
2. Establish a spare wheel.
3. Screw wheel nuts on hairpins (the conic party of nuts should be turned to a wheel). Tighten nuts by hand.

Fig. 1.172. An order of a tightening of fastening of nuts at installation of a spare wheel


4. Rotating the cranked handle of a jack counter-clockwise, lower the car. By means of a wheel key tighten nuts in 1.172 sequences specified in drawing.
Moment of an inhaling of wheel nuts: 88–117 N · m (9–11 kgfs · м).
5. Lay a faulty wheel in a niche of a luggage compartment and fix a wheel by means of a clamping washer and a bolt.
6. Check pressure of air in the tire.
7. As soon as possible repair the damaged wheel or replace it with the new.

«previous page
1.4.1.4. Dismantle of a faulty wheel
following page»
1.4.2. Engine overheat