Mazda 6 since 2002
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.2. General checks
5.3. Working operations with the steering mechanism
5.3.1. Precautionary measures at work with system of passive safety (SRS)
5.3.2. Removal, check and installation of a steering wheel and steering column
5.3.2.1. Removal
5.3.2.2. Installation
5.3.3. Dismantling of the steering mechanism and steering drafts
5.3.4. Check of the steering mechanism and steering drafts
5.4. Removal and installation of the pump of the hydraulic booster
6. Brake system
7. Onboard electric equipment
8. Body
 






sell cc

5-3-2-2-ustanovka.html

5.3.2.2. Installation

Establish a detail of the mechanism of blocking of a steering on a steering shaft.
Be convinced of the correct operation of the mechanism of blocking.
Establish new bolts of fastening of the mechanism of blocking.

Fig. 5.14. Tightening of bolts of fastening of the mechanism of blocking


Tighten bolts to an otlamyvaniye of heads (fig. 5.14).

Fig. 5.15. Bolts of fastening of a steering shaft


Block the lever of the mechanism of an inclination of a steering column (fig. 5.15).
Tighten A bolt.
Tighten B nut.
Tighten a nut of C.

ATTENTION
Do not strike blows in the direction of an axis of a shaft.

Establish car wheels in the provision of rectilinear movement, establish a steering wheel.

«previous page
5.3.2.1. Removal
following page»
5.3.3. Dismantling of the steering mechanism and steering drafts