|
2-1-3-4-maslyanyjj-filtr.html
2.1.3.4. Oil filterThe oil filter is attached on the right to the sensor of level of oil (from the oil pallet) on the block of cylinders. The case of the filter is made of plastic. The sensor of pressure of oil is established on the adapter of the oil filter. The mesh adapter with a polymeric grid in the middle is made of easily utilized material. The drain opening serves in the lower part of the filter for replacement of the oil filter. Maslookhladitel with water cooling is used for decrease in speed of degradation of engine oil. Besides, for a maslookhladitel the special adapter of the oil filter, (engines of the LF models and L3) was made
Table 2.16 of the Characteristic of the oil filter
|
|
Fig. 2.43. Oil filters of Mazda 6 cars: 1–block of cylinders; 2–sensor of level of oil; 3–laying; 4–oil filter; 5–cover of the oil filter; 6–adapter of the oil filter; 7–sensor of pressure of oil; 8–sealing ring; 9–maslookhladitel; 10-to a target branch pipe; 11-to the thermostat
|
|
|
Fig. 2.44. A principle of operation of the oil filter established on engines of the L8 model: 1–oil filter; 2–cover of the oil filter; 3–safety valve; 4–case of the oil filter; 5–normally; 6–unloading; 7–spring; 8–pressure of oil; 9–oil channel
|
|